How to make Cooler for wireless network router and prevent it from slowing down

It's an Steps showing you How to make Cooler for wireless network router and prevent it from slowing down
I used the computer’s fan cool the wireless wireless fan, attach and will use the same power source of wireless (wireless on any wireless OFF fan fan OFF)

Perhaps you will ask why should cool the router my wireless network?
The answer is: cooling the router are avoiding slowing down (especially while downloading large files) because if you are using the router too (such as the downloading of large files may notice that seeing LED in router) will get hot, and you know that electronic devices will not be effective if it is not working in the right temperature.

Step 1 Tools May required :

To make this project you will need:

Fan (I used Desktop pc 's fan).
Male jack that is similar to your wireless network jack (I found it in the old adapter).
Similar to your jack wireless female Jack.
Some glue.
You will need soldiers some wires.

Step 2 Connecting wires :

As you can see it in the peak of pine centre in the Jack is the (+) and the other is the (-)
The Red wire in the fan center PIN in the female jack (+) and the black wire to connect the other pin (s)
Now you need the male connector with the fan in parallel (as shown in the pic)
In my case, a male jack two wires inside the other. (+) Wire, is in the middle (the wire) and the wire (s) (the outer wire) is surrounded by (+) wire. Separation of the two wires and connect them to the right pin

I don , forget to protect them so it won 't be brief (I used the glue gun)

Step 3 Final Setup :

Make sure that the power source is the fan on the router (in my case it 15 V and 12 V fan, wireless), it would not be exactly the same.

now connect the router's plug for our female jack, fan starts and you should pay attention to which side of the fan is sucking and which side is blowing.

Side blow for the wireless glue (glue in a side which has many hols)